GEAR DRIVE CAM KITS FOR TWIN CAM 2007/LATER & 2006 DYNA MODELS

• Reduced maintenance (no plastic chain guides or tension shoes to wear and contaminate engine oil or clog oil passages)
• Cam timing remains constant; all drive and cam gears utilize a light press fit (gear lash) thus eliminating any chain stretch
• Bearing loads are reduced; no chain tensioners are used which can rob horsepower
• Critical sprocket alignment is unnecessary
• To ease installation and eliminate the need to remove the fuel tank and rocker covers, use our adjustable pushrods found in the engine section
• Includes instructions

Andrews 37HG Cam Kit
Timing(*): 18/38 & 46/14
Duration @ .053: 236 & 240
Duration @ .020: 272 & 276
Valve Lift: .510 & .510
Lift @ TDC: .174 & .148
Stock Springs
Application: Hot street cams for 88 or 96 inches. 80+ rear wheel horsepower possible with well tuned 88 motor; more with 95. Smooth idle, broad torque (2200-5600 RPM). Stock to 9.5 compression ratio
By: ANDREWS PRODUCTS INC